ASME Y00090

ASME Y00090

WELDING AND BRAZING QUALIFICATIONS
Interpretations Volume 17 - Section IX
WELDING AND BRAZING QUALIFICATIONS
Interpretations Volume 16 - Section IX
WELDING AND BRAZING QUALIFICATIONS
Interpretations Volume 15 - Section IX
WELDING AND BRAZING QUALIFICATIONS
Interpretations Volume 14 - Section IX
WELDING AND BRAZING QUALIFICATIONS
Interpretations Volume 13 - Section IX
WELDING AND BRAZING QUALIFICATIONS
Interpretations Volume 12 - Section IX
WELDING AND BRAZING QUALIFICATIONS
WELDING AND BRAZING QUALIFICATIONS

: In stock

Format
$293.00

Standard Details

Publication Date: 12/31/1985 - Complete Document Supplement W85

Document Type : Complete Document

Page Count : 644

Publication Date : 12/31/1985

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : W85

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 12/01/1985 - Amendment Supplement I85

Description :

General Information

This publication includes all written interpretations issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee in response to inquiries concerning interpretations of the ASME Boiler and Pressure Vessel Code. A contents is also included which lists subjects specific to the interpretations covered in the individual volume. These interpretations are not a part of the Addenda or the Code.

The interpretations are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised interpretation, bearing the original Interpretation Number with the suffix R, is presented. Following these revised interpretations, new interpretations, and revisions to them issued during the indicated dates, are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the interpretations for each affected Section.

ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.

An interpretation applies either to the Edition and Addenda in effect on the date of issuance of the interpretation or the Edition and Addenda stated in the interpretation. Subsequent revisions to the Code may supersede the interpretation.

For detailed instructions on preparation of technical inquiries to the Boiler and Pressure Vessel Committee, refer to Appendix B.

Subject and Numerical Indexes

Subject and numerical indexes have been prepared to assist the user in locating interpretations by subject matter or by location in the Code. They cover interpretations issued from Volume 12 up to and including the present volume, and will be updated with each volume.

Document Type : Amendment

Language : English

Page Count : 23

Publication Date : 12/01/1985

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : I85

Title : Interpretations Volume 17 - Section IX

Publication Date: 12/31/1985 - Amendment Supplement W85

Document Type : Amendment

Page Count : 65

Publication Date : 12/31/1985

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : W85

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 07/01/1985 - Amendment Supplement I85

Description :

General Information

This publication includes all written interpretations issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee in response to inquiries concerning interpretations of the ASME Boiler and Pressure Vessel Code. A contents is also included which lists subjects specific to the interpretations covered in the individual volume. These interpretations are not a part of the Addenda or the Code.

The interpretations are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised interpretation, bearing the original Interpretation Number with the suffix R, is presented. Following these revised interpretations, new interpretations, and revisions to them issued during the indicated dates, are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the interpretations for each affected Section.

ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.

An interpretation applies either to the Edition and Addenda in effect on the date of issuance of the interpretation or the Edition and Addenda stated in the interpretation. Subsequent revisions to the Code may supersede the interpretation.

For detailed instructions on preparation of technical inquiries to the Boiler and Pressure Vessel Committee, refer to Appendix B.

Subject and Numerical Indexes

Subject and numerical indexes have been prepared to assist the user in locating interpretations by subject matter or by location in the Code. They cover interpretations issued from Volume 12 up to and including the present volume, and will be updated with each volume.

Document Type : Amendment

Language : English

Page Count : 23

Publication Date : 07/01/1985

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : I85

Title : Interpretations Volume 16 - Section IX

Publication Date: 06/30/1985 - Amendment Supplement S85

Document Type : Amendment

Page Count : 65

Publication Date : 06/30/1985

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : S85

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 12/01/1984 - Amendment Supplement I84

Description :

General Information

This publication includes all written interpretations issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee in response to inquiries concerning interpretations of the ASME Boiler and Pressure Vessel Code. A contents is also included which lists subjects specific to the interpretations covered in the individual volume. These interpretations are not a part of the Addenda or the Code.

The interpretations are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised interpretation, bearing the original Interpretation Number with the suffix R, is presented. Following these revised interpretations, new interpretations, and revisions to them issued during the indicated dates, are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the interpretations for each affected Section.

ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.

An interpretation applies either to the Edition and Addenda in effect on the date of issuance of the interpretation or the Edition and Addenda stated in the interpretation. Subsequent revisions to the Code may supersede the interpretation.

For detailed instructions on preparation of technical inquiries to the Boiler and Pressure Vessel Committee, refer to Appendix B.

Subject and Numerical Indexes

Subject and numerical indexes have been prepared to assist the user in locating interpretations by subject matter or by location in the Code. They cover interpretations issued from Volume 12 up to and including the present volume, and will be updated with each volume.

Document Type : Amendment

Language : English

Page Count : 19

Publication Date : 12/01/1984

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : I84

Title : Interpretations Volume 15 - Section IX

Publication Date: 12/31/1984 - Amendment Supplement W84

Document Type : Amendment

Page Count : 40

Publication Date : 12/31/1984

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : W84

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 07/01/1984 - Amendment Supplement I84

Description :

This publication includes all of the written replies issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee to inquiries concerning interpretations of the Boiler and Pressure Vessel Code. These interpretations are not a part of the Addenda or the Code.

These replies are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised reply, bearing the original Interpretation Number with suffix R, is presented. Following these revised replies, new interpretations, and revisions to them issued during the same 6-month period, are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the replies pertaining to each affected Section.

ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.

These replies apply to the latest Edition and Addenda at the time of the inquiry or the Edition and Addenda stated in the reply. Subsequent revisions to the rules may have superseded the reply.

For detailed instructions on "Preparation of Technical Inquiries to the Boiler and Pressure Vessel Committee," refer to Mandatory Appendix B.

Document Type : Amendment

Language : English

Page Count : 10

Publication Date : 07/01/1984

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : I84

Title : Interpretations Volume 14 - Section IX

Publication Date: 06/30/1984 - Amendment Supplement S84

Document Type : Amendment

Page Count : 82

Publication Date : 06/30/1984

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : S84

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 12/01/1983 - Amendment Supplement I83

Description :

This publication includes all of the written replies issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee to inquiries concerning interpretations of the Boiler and Pressure Vessel Code. These interpretations are not a part of the Addenda or the Code.

These replies are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised reply, bearing the original Interpretation Number with suffix R, is presented. Following these revised replies, new interpretations, and revisions to them issued during the same 6-month period, are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the replies pertaining to each affected Section.

ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.

These replies apply to the latest Edition and Addenda at the time of the inquiry or the Edition and Addenda stated in the reply. Subsequent revisions to the rules may have superseded the reply.

For detailed instructions on "Preparation of Technical Inquiries to the Boiler and Pressure Vessel Committee," refer to Mandatory Appendix B.

Document Type : Amendment

Language : English

Page Count : 24

Publication Date : 12/01/1983

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : I83

Title : Interpretations Volume 13 - Section IX

Publication Date: 12/31/1983 - Amendment Supplement W83

Document Type : Amendment

Page Count : 37

Publication Date : 12/31/1983

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : W83

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 07/01/1983 - Amendment Supplement I83

Description :

This publication includes all of the written replies issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee to inquiries concerning interpretations of the Boiler and Pressure Vessel Code. These interpretations are not a part of the Addenda or the Code.

These replies are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised reply, bearing the original Interpretation Number with suffix R, is presented. Following these revised replies, new interpretations, and revisions to them issued during the same 6-month period, are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the replies pertaining to each affected Section.

ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.

These replies apply to the latest Edition and Addenda at the time of the inquiry or the Edition and Addenda stated in the reply. Subsequent revisions to the rules may have superseded the reply.

For detailed instructions on "Preparation of Technical Inquiries to the Boiler and Pressure Vessel Committee," refer to Mandatory Appendix B.

Document Type : Amendment

Language : English

Page Count : 18

Publication Date : 07/01/1983

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : I83

Title : Interpretations Volume 12 - Section IX

Publication Date: 06/30/1983 - Amendment Supplement S83

Document Type : Amendment

Page Count : 101

Publication Date : 06/30/1983

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Supplement : S83

Title : WELDING AND BRAZING QUALIFICATIONS

Publication Date: 07/01/1983 - Base Document

Document Type : Base Document

Page Count : 245

Publication Date : 07/01/1983

Revision : 83

Status : Historical

Superseding Document : ASME F00090

Title : WELDING AND BRAZING QUALIFICATIONS

Quick Add

$423.00
$289.00
$485.00