ASME B94.6

ASME B94.6

Knurling
Knurling
KNURLING
Knurling
KNURLING
KNURLING

: In stock

Format
$33.00

Standard Details

Scope:
SCOPE AND PURPOSE

This Standard covers knurling tolls with standardized diametral pitches and includes dimensional relations with stock in the production of straight, diagonal, and diamond knurling on cylindrical surfaces having teetch of uniform pitch parallel to the axis of the cylinder or at a helix angle not exceeding 45 deg. With axis of work. Such knurling is made by displacement of the material on the surface when rotated under pressure against a knurling tool. These tools and recommendations are equally applicable to general prupose and precision knurling. In brief, the advantage of this method is the provision by which good tracking (the ability of teetch to mesh as the tool penetrates the work blank in successive revolutions) is obtained by tools designed on the basis of diametral pitch instead of tpi (teetch per inch) when used with recommended work blank diameters that are multiples of 1/64 or 1/32 in., depending upon the pitch selected. This should improve the uniformity and appearance of knurling, eliminate the costly trial and error methods, reduce the failure of knurling tools and production of defective work as well as decrease the number of tools required.



Organization: ASME International
Document Number: asme b94.6
Publish Date: 1984-01-01
Page Count: 24
Change Type: REAF
Available Languages: EN
DOD Adopted: NO
ANSI Approved: YES
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 01/01/1984 - Complete Document Changes Incorporated

Description :

SCOPE AND PURPOSE

This Standard covers knurling tolls with standardized diametral pitches and includes dimensional relations with stock in the production of straight, diagonal, and diamond knurling on cylindrical surfaces having teetch of uniform pitch parallel to the axis of the cylinder or at a helix angle not exceeding 45 deg. With axis of work. Such knurling is made by displacement of the material on the surface when rotated under pressure against a knurling tool. These tools and recommendations are equally applicable to general prupose and precision knurling. In brief, the advantage of this method is the provision by which good tracking (the ability of teetch to mesh as the tool penetrates the work blank in successive revolutions) is obtained by tools designed on the basis of diametral pitch instead of tpi (teetch per inch) when used with recommended work blank diameters that are multiples of 1/64 or 1/32 in., depending upon the pitch selected. This should improve the uniformity and appearance of knurling, eliminate the costly trial and error methods, reduce the failure of knurling tools and production of defective work as well as decrease the number of tools required.

 

Document Type : Complete Document

Language : English

Page Count : 24

Publication Date : 01/01/1984

Revision : 84

Status : Current

Supplement : W/

Title : Knurling

Publication Date: 01/01/1984 - Base Document Changes Incorporated

Description :

This Standard covers knurling tools with standardized diametral pitches and includes dimensional relations with stock in the production of straight, diagonal, and diamond knurling on cylindrical surfaces having teeth of uniform pitch parallel to the axis of the cylinder or at a helix angle not exceeding 45 deg. with axis of work. Such knurling is made by displacement of the material on the surface when rotated under pressure against a knurling tool.

These tools and recommendations are equally applicable to general purpose and precision knurling. In brief, the advantage of this method is the provision by which good tracking (the ability of teeth to mesh as the tool penetrates the work blank in successive revolutions) is obtained by tools designed on the basis of diametral pitch instead of tpi (teeth per inch) when used with recommended work blank diameters that are multiples of 1/64 or 1/32 in., depending upon the pitch selected. This should improve the uniformity and appearance of knurling, eliminate the costly trial and error methods, reduce the failure of knurling tools and production of defective work, as well as decrease the number of tools required.

Document Type : Base Document

Language : English

Page Count : 24

Publication Date : 01/01/1984

Revision : 84

Status : Current

Supplement : W/

Title : Knurling

Publication Date: 01/01/2003 - Base Document

Document Type : Base Document

Page Count : 22

Publication Date : 01/01/2003

Revision : 84

Status : Current

Title : KNURLING

Publication Date: 01/01/1984 - Base Document

Description :

This Standard covers knurling tools with standardized diametral pitches and includes dimensional relations with stock in the production of straight, diagonal, and diamond knurling on cylindrical surfaces having teeth of uniform pitch parallel to the axis of the cylinder or at a helix angle not exceeding 45 deg. with axis of work. Such knurling is made by displacement of the material on the surface when rotated under pressure against a knurling tool.

These tools and recommendations are equally applicable to general purpose and precision knurling. In brief, the advantage of this method is the provision by which good tracking (the ability of teeth to mesh as the tool penetrates the work blank in successive revolutions) is obtained by tools designed on the basis of diametral pitch instead of tpi (teeth per inch) when used with recommended work blank diameters that are multiples of 1/64 or 1/32 in., depending upon the pitch selected. This should improve the uniformity and appearance of knurling, eliminate the costly trial and error methods, reduce the failure of knurling tools and production of defective work, as well as decrease the number of tools required.

Document Type : Base Document

Language : English

Page Count : 22

Publication Date : 01/01/1984

Revision : 84

Status : Current

Title : Knurling

Publication Date: 01/01/1981 - Complete Document

Document Type : Complete Document

Page Count : 19

Publication Date : 01/01/1981

Revision : 81

Status : Historical

Title : KNURLING

Publication Date: 01/01/2066 - Complete Document

Document Type : Complete Document

Page Count : 18

Publication Date : 01/01/2066

Revision : 66

Status : Historical

Title : KNURLING

Quick Add

$423.00
$289.00
$485.00