ASME B47.1

ASME B47.1

Gage Blanks
Gage Blanks
Gage Blanks
Gage Blanks
Gage Blanks
GAGE BLANKS

: In stock

Format
$115.00

Standard Details

Scope:
This Standard covers standard designs for the following:

(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter

(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter

(c) involute and serrated spline plug and ring gage blanks to 8.000 in. major diameter

(d) straight-sided spline plug and ring gage blanks to major diameters of 8.000 in. for plugs and 6.000 in. for rings

(e) machine taper plug and ring gage blanks to 5.000 in. gaging diameter

(f) adjustable snap gages to 12 in.

(g) adjustable length gages to any desired length

(h) master disks up to 8.010 in. in diameter

Recommended general designs covering taper plug and ring gages for special applications, flush-pin gages, and flat plug gages are also included.

This Standard is intended to deal only with the dimensions of blanks, frames, and fittings. However, it is expected that gages made from these blanks shall be finished in accordance with accepted good gage making practice with respect to accuracy and workmanship.

NOTES:

(1) While compliance to the revised specifications in this document is urged as soon as possible, the use of blanks and designs in ASME/ANSl B47.1-1988 is permissible for a period of 5 years from approval date of this document.

(2) Types of steel or other material for gage blanks and components are not standardized in this document. The type of material and hardness should be agreed upon by producer and user of the gages.

(3) Certain tables in this document show both nominal thread ranges as well as decimal ranges. In such cases, the decimal range establishes the official dividing line from one blank or handle size to the next.

(4) The following designates correct blank size to use:

(a) thread plugs—go actual major

(b) plain plugs—no go major

(c) thread rings—go actual major

(d) plain rings—go gage/dimensions

Organization: ASME International
Document Number: asme b47.1
Publish Date: 2007-01-01
Page Count: 148
Change Type: REAF
Available Languages: EN
DOD Adopted: NO
ANSI Approved: YES
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 01/01/2007 - Complete Document Changes Incorporated

Description :

This Standard covers standard designs for the following:

(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter

(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter

(c) involute and serrated spline plug and ring gage blanks to 8.000 in. major diameter

(d) straight-sided spline plug and ring gage blanks to major diameters of 8.000 in. for plugs and 6.000 in. for rings

(e) machine taper plug and ring gage blanks to 5.000 in. gaging diameter

(f) adjustable snap gages to 12 in.

(g) adjustable length gages to any desired length

(h) master disks up to 8.010 in. in diameter

Recommended general designs covering taper plug and ring gages for special applications, flush-pin gages, and flat plug gages are also included.

This Standard is intended to deal only with the dimensions of blanks, frames, and fittings. However, it is expected that gages made from these blanks shall be finished in accordance with accepted good gage making practice with respect to accuracy and workmanship.

NOTES:

(1) While compliance to the revised specifications in this document is urged as soon as possible, the use of blanks and designs in ASME/ANSl B47.1-1988 is permissible for a period of 5 years from approval date of this document.

(2) Types of steel or other material for gage blanks and components are not standardized in this document. The type of material and hardness should be agreed upon by producer and user of the gages.

(3) Certain tables in this document show both nominal thread ranges as well as decimal ranges. In such cases, the decimal range establishes the official dividing line from one blank or handle size to the next.

(4) The following designates correct blank size to use:

(a) thread plugs—go actual major

(b) plain plugs—no go major

(c) thread rings—go actual major

(d) plain rings—go gage/dimensions

Document Type : Complete Document

Language : English

Page Count : 148

Publication Date : 01/01/2007

Revision : 07

Status : Current

Supplement : W/

Title : Gage Blanks

Publication Date: 01/01/2010 - Amendment

Description :

This Standard covers standard designs for the following:

(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter

(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter

(c) involute and serrated spline plug and ring gage blanks to 8.000 in. major diameter

(d) straight-sided spline plug and ring gage blanks to major diameters of 8.000 in. for plugs and 6.000 in. for rings

(e) machine taper plug and ring gage blanks to 5.000 in. gaging diameter

(f) adjustable snap gages to 12 in.

(g) adjustable length gages to any desired length (h) master disks up to 8.010 in. in diameter

Recommended general designs covering taper plug and ring gages for special applications, flush-pin gages, and flat plug gages are also included.

This Standard is intended to deal only with the dimensions of blanks, frames, and fittings. However, it is expected that gages made from these blanks shall be finished in accordance with accepted good gage making practice with respect to accuracy and workmanship.

NOTES:

(1) While compliance to the revised specifications in this document is urged as soon as possible, the use of blanks and designs in ASME/ANSl B47.1-1988 is permissible for a period of 5 years from approval date of this document.

(2) Types of steel or other material for gage blanks and components are not standardized in this document. The type of material and hardness should be agreed upon by producer and user of the gages.

(3) Certain tables in this document show both nominal thread ranges as well as decimal ranges. In such cases, the decimal range establishes the official dividing line from one blank or handle size to the next.

(4) The following designates correct blank size to use:

(a) thread plugs—go actual major

(b) plain plugs—no go major

(c} thread rings—go actual major (

d) plain rings—go gage/dimensions

Document Type : Amendment

Language : English

Page Count : 2

Publication Date : 01/01/2010

Revision : 07

Status : Current

Title : Gage Blanks

Publication Date: 01/01/2007 - Base Document

Description :

This Standard covers standard designs for the following:

(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter

(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter

(c) involute and serrated spline plug and ring gage blanks to 8.000 in. major diameter

(d) straight-sided spline plug and ring gage blanks to major diameters of 8.000 in. for plugs and 6.000 in. for rings

(e) machine taper plug and ring gage blanks to 5.000 in. gaging diameter

(f) adjustable snap gages to 12 in.

(g) adjustable length gages to any desired length (h) master disks up to 8.010 in. in diameter

Recommended general designs covering taper plug and ring gages for special applications, flush-pin gages, and flat plug gages are also included.

This Standard is intended to deal only with the dimensions of blanks, frames, and fittings. However, it is expected that gages made from these blanks shall be finished in accordance with accepted good gage making practice with respect to accuracy and workmanship.

NOTES:

(1) While compliance to the revised specifications in this document is urged as soon as possible, the use of blanks and designs in ASME/ANSl B47.1-1988 is permissible for a period of 5 years from approval date of this document.

(2) Types of steel or other material for gage blanks and components are not standardized in this document. The type of material and hardness should be agreed upon by producer and user of the gages.

(3) Certain tables in this document show both nominal thread ranges as well as decimal ranges. In such cases, the decimal range establishes the official dividing line from one blank or handle size to the next.

(4) The following designates correct blank size to use:

(a) thread plugs—go actual major

(b) plain plugs—no go major

(c} thread rings—go actual major (

d) plain rings—go gage/dimensions

Document Type : Base Document

Language : English

Page Count : 146

Publication Date : 01/01/2007

Revision : 07

Status : Current

Title : Gage Blanks

Publication Date: 11/15/1988 - Complete Document Changes Incorporated *

Description :

This Standard covers standard designs for the following:

(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter

(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter

(c) involute and serrated-spline plug and ring gage blanks to 8.000 in. major diameter

(d) straight-sided spline plug and ring gage blanks to major diameters of 8.000 in. for plugs and 6.000 in. for rings

(e) machine taper plug and ring gage blanks to 5.000 in. gaging diameter

(f) adjustable snap gages to 12 in.

(g) adjustable length gages to any desired length

(h) master disks up to 8.010 in. in diameter

Recommended general designs covering taper plug and ring gages for special applications, flush-pin gages, and flat plug gages are also included.

This Standard is intended to deal only with the dimensions of blanks, frames, and fittings. However, it is expected that gages made from these blanks shall be finished in accordance with accepted good gagemaking practice with respect to accuracy and workmanship.

Document Type : Complete Document

Edition : Revision of ANSI/ASME B47.1AM-1982

Language : English

Page Count : 166

Publication Date : 11/15/1988

Revision : 88

Status : Historical

Supplement : W/

Title : Gage Blanks

Publication Date: 01/01/1988 - Base Document Changes Incorporated *

Description :

This Standard covers standard designs for the following:

(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter

(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter

(c) involute and serrated spline plug and ring gage blanks to 8.000 in. major diameter

(d) straight-sided spline plug and ring gage blanks to major diameters of 8.000 in. for plugs and 6.000 in. for rings

(e) machine taper plug and ring gage blanks to 5.000 in, gaging diameter

(f) adjustable snap gages to 12 in.

(g) adjustable length gages to any desired length

(h) master disks up to 8.010 in. in diameter

Recommended general designs covering taper plug and ring gages for special applications, flush-pin gages, and flat plug gages are also included.

This Standard is intended to deal only with the dimensions of blanks, frames, and fittings. However, it is expected that gages made from these blanks shall be finished in accordance with accepted good gagemaking practice with respect to accuracy and workmanship.

Document Type : Base Document

Edition : Revision of ANSI/ASME B47.1AM-1982

Language : English

Page Count : 158

Publication Date : 01/01/1988

Revision : 88

Status : Historical

Supplement : W/

Title : Gage Blanks

Publication Date: 07/31/1981 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 121

Publication Date : 07/31/1981

Revision : 81

Status : Historical

Title : GAGE BLANKS

Quick Add

$423.00
$289.00
$485.00

Additional titles: