ASME B18.6.3

ASME B18.6.3

Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
Machine Screws and Machine Screw Nuts
MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)
Machine Screws and Machine Screw Nuts
Machine Screws and Machine Screw Nuts

: In stock

Format
$99.00

Standard Details

Scope:
This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws, tapping screws, and metallic drive screws recognized as American National Standard. Also included are appendices that provide specifications and instructions for the protrusion gaging of flat countersunk head screws; across-corners gaging of hex head screws; penetration gaging and wobble gaging of recessed head screws; approximate hole size for tapping screws; wrench openings for hex and square products; thread dimensions for the No. 0000, No. 000, and No. 00 sizes; means for determining effective grip lengths on screws; documentation for screw types and head types relegated to not-recommended or limited-usage status; and formulas on which dimensional data are based. It shall be understood, however, that where questions arise concerning acceptance of product, the dimensions in the tables shall govern over recalculation by formula.

The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult with suppliers concerning the availability of products.

Organization: ASME International
Document Number: asme b18.6.3
Publish Date: 2013-10-11
Page Count: 144
Change Type: COMPLETE REVISION
Available Languages: EN
DOD Adopted: NO
ANSI Approved: YES
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 10/11/2013 - Complete Document

Description :

This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws, tapping screws, and metallic drive screws recognized as American National Standard. Also included are appendices that provide specifications and instructions for the protrusion gaging of flat countersunk head screws; across-corners gaging of hex head screws; penetration gaging and wobble gaging of recessed head screws; approximate hole size for tapping screws; wrench openings for hex and square products; thread dimensions for the No. 0000, No. 000, and No. 00 sizes; means for determining effective grip lengths on screws; documentation for screw types and head types relegated to not-recommended or limited-usage status; and formulas on which dimensional data are based. It shall be understood, however, that where questions arise concerning acceptance of product, the dimensions in the tables shall govern over recalculation by formula.

The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult with suppliers concerning the availability of products.

Document Type : Complete Document

Language : English

Page Count : 144

Publication Date : 10/11/2013

Revision : 13

Status : Current

Title : Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)

Publication Date: 01/01/2010 - Complete Document

Description :

This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws, tapping screws, and metallic drive screws recognized as American National Standard. Also included are appendices that provide specifications and instructions for the protrusion gaging of flat countersunk head screws; across-corners gaging of hex head screws; penetration gaging and wobble gaging of recessed head screws; approximate hole size for tapping screws; wrench openings for hex and square products; thread dimensions for the No. 0000, No. 000, and No. 00 sizes; means for determining effective grip lengths on screws; documentation for screw types and head types relegated to not-recommended or limited-usage status; and formulas on which dimensional data are based. It shall be understood, however, that where questions arise concerning acceptance of product, the dimensions in the tables shall govern over recalculation by formula.

The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult with suppliers concerning the availability of products.

Document Type : Complete Document

Language : English

Page Count : 144

Publication Date : 01/01/2010

Revision : 10

Status : Historical

Title : Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)

Publication Date: 01/01/2003 - Complete Document

Description :

This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws and machine screw nuts recognized as American National Standard. Also included are appendices that provide specifications and instructions for the protrusion gaging of flat countersunk head screws; across-corners gaging of hex head screws; penetration gaging and wobble gaging of recessed head screws; wrench openings for hex and square products; thread dimensions for the No. 0000, No. 000, and No. 00 sizes; and formulas on which dimensional data are based. It shall be understood, however, that where questions arise concerning acceptance of product, the dimensions in the tables shall govern over recalculation by formula.

The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult with suppliers concerning the availability of products.

Document Type : Complete Document

Language : English

Page Count : 136

Publication Date : 01/01/2003

Revision : 03

Status : Historical

Title : Machine Screws and Machine Screw Nuts

Publication Date: 01/01/2003 - Base Document

Document Type : Base Document

Page Count : 136

Publication Date : 01/01/2003

Revision : 03

Status : Historical

Title : MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)

Publication Date: 01/01/1998 - Complete Document

Description :

This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws and machine screw nuts recognized as American National Standard. Also included are appendices that provide specifications and instructions for the protrusion gaging of flat countersunk head screws; across-comers gaging of hex head screws; penetration gaging and wobble gaging of recessed head screws; wrench openings for hex and square products; thread dimensions for the No. 0000, No. 000, and No. 00 sizes; and formulas on which dimensional data are based. It shall be understood, however, that where questions arise concerning acceptance of product, the dimensions in the tables shall govern over recalculation by formula.

The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult with manufacturers concerning the availability of products.

Document Type : Complete Document

Language : English

Page Count : 109

Publication Date : 01/01/1998

Revision : 98

Status : Historical

Title : Machine Screws and Machine Screw Nuts

Publication Date: 01/01/1972 - Complete Document Changes Incorporated

Description :

This standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws and machine screw nuts recognized as "American National Standard". Also included are appendixes which provide specifications and instructions for the protrusion gaging of flat countersunk head screws; across corners gaging of hex head screws; penetration gaging and wobble gaging of recessed head screws; wrench openings for hex and square products; thread dimensions for the No. 0000, No. O00 and No. O0 sizes; and formulas on which dimensional data are based. It shall be understood, however, that where questions arise concerning acceptance of product, the dimensions in the tables shall govern over recalculation by formula.

The inclusion of dimensional data in this standard is not Mended to imply that all of the products described are stock production sizes. Consumers should consult with manufacturers concerning the availability of products.

Document Type : Complete Document

Language : English

Page Count : 85

Publication Date : 01/01/1972

Revision : 72

Status : Historical

Supplement : W/

Title : Machine Screws and Machine Screw Nuts

Quick Add

$423.00
$289.00
$485.00