ASME A112.19.7

ASME A112.19.7

Hydromassage bathtub systems
Hydromassage Bathtub Appliances

: In stock

Format
$45.00

Standard Details

Scope:
This Standard specifies general requirements, test methods, and markings for whirlpool and air-jetted bathtubs and suction fittings used in hydromassage bathtub systems that incorporate a bathtub and circulation pump. The circulation pump can be with or without

(a) a piping system; and

(b) induction of air (which can be achieved by integral suction or through an air pump).

This Standard does not cover

(a) spas and hot tubs covered in CAN/CSA-C22.2 No. 218.1 and UL 1563;

(b) portable hydromassage products covered in CSA Electrical Bulletin 1268 and CSA Electrical Bulletin 1270; and

(c) hydrotherapy bathtubs or patient bathing systems for institutional use.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex A.

Organization: ASME International
Document Number: asme a112.19.7
Publish Date: 2012-01-01
Page Count: 44
Available Languages: EN
DOD Adopted: NO
ANSI Approved: YES
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 01/01/2012 - Complete Document

Description :

This Standard specifies general requirements, test methods, and markings for whirlpool and air-jetted bathtubs and suction fittings used in hydromassage bathtub systems that incorporate a bathtub and circulation pump. The circulation pump can be with or without

(a) a piping system; and

(b) induction of air (which can be achieved by integral suction or through an air pump).

This Standard does not cover

(a) spas and hot tubs covered in CAN/CSA-C22.2 No. 218.1 and UL 1563;

(b) portable hydromassage products covered in CSA Electrical Bulletin 1268 and CSA Electrical Bulletin 1270; and

(c) hydrotherapy bathtubs or patient bathing systems for institutional use.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex A.

Document Type : Complete Document

Language : English

Page Count : 44

Publication Date : 01/01/2012

Revision : 12

Status : Current

Title : Hydromassage bathtub systems

Publication Date: 06/02/2006 - Complete Document

Description :

This Standard establishes performance criteria for whirlpool and air-jetted bathtub appliances and suction fittings used in whirlpool bathtub appliances. It is intended for use by, but not limited to: manufacturers, distributors, retailers, architects, engineers, plumbing contractors, jetters, installers, regulatory agencies, and users. This Standard shall govern the construction, general requirements, test methods, and marking for whirlpool and air-jetted bathtub appliances that incorporate a bathtub, a circulation pump, and a piping system, with or without the introduction of air, either by integral suction or air pump. Optional accessories for such appliances shall be permitted to be provided in the factory or field, provided that such accessories do not negate the performance of whirlpool hydromassage bathtub appliances designed to comply with this Standard. Suction fittings that are used within whirlpool bathtub appliances shall be evaluated to this Standard.

The provisions of this Standard shall enable identification of specific units that are in compliance with this document. The provisions of this Standard shall not be construed to prevent the use of any alternate material or method of construction, provided any such alternate meets the intent of this Standard.

Document Type : Complete Document

Language : English

Page Count : 26

Publication Date : 06/02/2006

Revision : 06

Status : Historical

Title : Hydromassage Bathtub Appliances

Quick Add

$423.00
$289.00
$485.00