ASME A112.19.5

ASME A112.19.5

Flush valves and spuds for water closets, urinals, and tanks
Flush valves and spuds for water closets, urinals, and tanks
Trim for Water-Closet Bowls, Tanks, and Urinals
Trim for Water-Closet Bowls, Tanks, and Urinals
Trim for Water-Closet Bowls, Tanks, and Urinals (Dimensional Standards)

: In stock

Format
$95.00

Standard Details

This Standard covers spuds and flush valves for water closet bowls, tanks, and urinals.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses.

The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex A.

Organization: ASME International
Document Number: asme a112.19.5
Publish Date: 2011-01-01
Page Count: 28
Change Type: REAF
Available Languages: EN
DOD Adopted: NO
ANSI Approved: YES
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 01/01/2011 - Complete Document Changes Incorporated *

Description :

This Standard covers spuds and flush valves for water closet bowls, tanks, and urinals.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses.

The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex A.

Document Type : Complete Document

Edition : Includes Update No. 1: 5/2012

Language : English

Page Count : 28

Publication Date : 01/01/2011

Revision : 11

Status : Current

Supplement : W/

Title : Flush valves and spuds for water closets, urinals, and tanks

Publication Date: 01/01/2011 - Base Document

Description :

This Standard covers spuds and flush valves for water closet bowls, tanks, and urinals.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses.

The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard

Document Type : Base Document

Language : English

Page Count : 28

Publication Date : 01/01/2011

Revision : 11

Status : Current

Title : Flush valves and spuds for water closets, urinals, and tanks

Publication Date: 01/01/2005 - Complete Document

Description :

This Standard establishes criteria for those items of trim for water-closet bowls, tanks, and urinals known as spuds, locknuts for spuds, flush valves, and flush elbows. Requirements for fill valves (ballcocks) are defined in ANSI/ASSE 1002.

This Standard does not address the compatibility of materials. Nothing stated herein shall preclude the production of special design flush valves with unique nonstandard features for use in low-consumption plumbing fixtures.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 01/01/2005

Revision : 05

Status : Historical

Title : Trim for Water-Closet Bowls, Tanks, and Urinals

Publication Date: 05/27/1999 - Complete Document

Description :

This Standard establishes criteria for those items of trim for water-closet bowls, tanks, and urinals known as spuds, locknuts for spuds, flush valves, and flush elbows. Requirements for fill valves (ballcocks) are defined in ANSI/ASSE 1002.

This Standard does not address the compatibility of materials. Nothing stated herein shall preclude the production of special design flush valves with unique non-standard features for use in low consumption plumbing fixtures.

Document Type : Complete Document

Language : English

Page Count : 17

Publication Date : 05/27/1999

Revision : 99

Status : Historical

Title : Trim for Water-Closet Bowls, Tanks, and Urinals

Publication Date: 06/30/1979 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 23

Publication Date : 06/30/1979

Revision : 79

Status : Historical

Title : Trim for Water-Closet Bowls, Tanks, and Urinals (Dimensional Standards)

Quick Add

$460.00
$297.00
$485.00

Please call 1-800-566-1677 for quotes on subscriptions

See More titles in a

See More titles in ASME

See More titles in Designators