ASME A112.19.2

ASME A112.19.2

Ceramic plumbing fixtures
Ceramic plumbing fixtures
Ceramic plumbing fixtures
Ceramic plumbing fixtures
Ceramic plumbing fixtures
Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals
CERAMIC PLUMBING FIXTURES

: In stock

Format
$110.00

Standard Details

Scope:
This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) bidets;

(c) drinking fountains;

(d) fixtures for institutional applications;

(e) lavatories;

(f) shower bases;

(g) sinks:

(i) laboratory sinks;

(ii) laundry sinks;

(iii) service sinks;

(iv) utility sinks;

(v) kitchen sinks; and

(vi) clinic sinks;

(h) urinals; and

(i) water closets.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex B.

Organization: ASME International
Document Number: asme a112.19.2
Publish Date: 2013-01-01
Page Count: 86
Change Type: A1
Available Languages: EN
DOD Adopted: NO
ANSI Approved: YES
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 01/01/2013 - Complete Document Changes Incorporated *

Description :

This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) bidets;

(c) drinking fountains;

(d) fixtures for institutional applications;

(e) lavatories;

(f) shower bases;

(g) sinks:

(i) laboratory sinks;

(ii) laundry sinks;

(iii) service sinks;

(iv) utility sinks;

(v) kitchen sinks; and

(vi) clinic sinks;

(h) urinals; and

(i) water closets.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex B.

Document Type : Complete Document

Edition : Includes Update No. 1: 10/2013

Language : English

Page Count : 86

Publication Date : 01/01/2013

Revision : 13

Status : Current

Supplement : W/

Title : Ceramic plumbing fixtures

Publication Date: 01/01/2013 - Base Document

Description :

This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) bidets;

(c) drinking fountains;

(d) fixtures for institutional applications;

(e) lavatories;

(f) shower bases;

(g) sinks:

(i) laboratory sinks;

(ii) laundry sinks;

(iii) service sinks;

(iv) utility sinks;

(v) kitchen sinks; and

(vi) clinic sinks;

(h) urinals; and

(i) water closets.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex B.

Document Type : Base Document

Language : English

Page Count : 80

Publication Date : 01/01/2013

Revision : 13

Status : Current

Title : Ceramic plumbing fixtures

Publication Date: 01/01/2008 - Complete Document Changes Incorporated *

Description :

This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) bidets;

(c) drinking fountains;

(d) fixtures for institutional applications;

(e) lavatories;

(f) shower bases;

(g) sinks:

(i) laboratory sinks;

(ii) laundry sinks;

(iii) service sinks; and

(iv) utility sinks;

(h) urinals; and

(i) water closets.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex B.

Document Type : Complete Document

Edition : Includes Update No. 1: August 2009 and Update No. 2: March 2011

Language : English

Page Count : 108

Publication Date : 01/01/2008

Revision : 08

Status : Historical

Supplement : W/

Title : Ceramic plumbing fixtures

Publication Date: 08/01/2009 - Amendment

Document Type : Amendment

Language : English

Page Count : 10

Publication Date : 08/01/2009

Revision : 08

Status : Historical

Title : Ceramic plumbing fixtures

Publication Date: 01/01/2008 - Base Document

Description :

This Standard establishes requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china plumbing fixtures. The sanitary performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity waste systems in permanent buildings and structures, independent of occupancy. Fixtures referenced in this Standard include water closets, lavatories, urinals, bidets, service sinks, drinking fountains, and institutional application fixtures.

Document Type : Base Document

Language : English

Page Count : 78

Publication Date : 01/01/2008

Revision : 08

Status : Historical

Title : Ceramic plumbing fixtures

Publication Date: 01/01/2003 - Complete Document Changes Incorporated *

Description :

This Standard establishes requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china plumbing fixtures. The sanitary performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity waste systems in permanent buildings and structures, independent of occupancy. Fixtures referenced in this Standard include water closets, lavatories, urinals, bidets, service sinks, drinking fountains, and institutional application fixtures.

Document Type : Complete Document

Edition : Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6

Language : English

Page Count : 70

Publication Date : 01/01/2003

Revision : 03

Status : Historical

Supplement : W/

Title : Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals

Publication Date: 01/01/2003 - Base Document

Document Type : Base Document

Page Count : 70

Publication Date : 01/01/2003

Revision : 03

Status : Historical

Title : CERAMIC PLUMBING FIXTURES

Quick Add

$423.00
$289.00
$485.00