ASME A112.19.1

ASME A112.19.1

Enamelled cast iron and enamelled steel plumbing fixtures
Enamelled cast iron and enamelled steel plumbing fixtures
Enamelled cast iron and enamelled steel plumbing fixtures

: In stock

Format
$80.00

Standard Details

This Standard covers enamelled cast iron and enamelled steel plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) drinking fountains and water coolers;

(c) lavatories;

(d) shower bases; and

(e) sinks:

(i) kitchen and bar sinks;

(ii) laundry sinks;

(iii) service sinks; and

(iv) utility sinks.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex A.

Publication Date: 01/01/2013 - Complete Document

Description :

This Standard covers enamelled cast iron and enamelled steel plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) drinking fountains and water coolers;

(c) lavatories;

(d) shower bases; and

(e) sinks:

(i) kitchen and bar sinks;

(ii) laundry sinks;

(iii) service sinks; and

(iv) utility sinks.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex A.

Document Type : Complete Document

Language : English

Page Count : 40

Publication Date : 01/01/2013

Revision : 13

Status : Current

Title : Enamelled cast iron and enamelled steel plumbing fixtures

Publication Date: 01/01/2008 - Complete Document Changes Incorporated *

Description :

This Standard covers enamelled cast iron and enamelled steel plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings.

This Standard covers the following plumbing fixtures:

(a) bathtubs;

(b) drinking fountains and water coolers;

(c) lavatories;

(d) shower bases; and

(e) sinks:

(i) kitchen and bar sinks;

(ii) laundry sinks;

(iii) service sinks; and

(iv) utility sinks.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the unit conversion criteria used in this Standard, see Annex A.

Document Type : Complete Document

Edition : Includes Update No. 1: November 2008 and Update No. 2: March 2011

Language : English

Page Count : 58

Publication Date : 01/01/2008

Revision : 08

Status : Historical

Supplement : W/

Title : Enamelled cast iron and enamelled steel plumbing fixtures

Publication Date: 01/01/2008 - Base Document

Description :

General

This Standard applies to enameled cast iron plumbing fixtures and includes requirements for materials, construction, inspection, testing, marking, and definitions. Types and sizes of fixtures currently in general use and demand are given for enameled cast iron bathtubs, lavatories, sinks, and laundry trays. (See Section 5.)

Document Type : Base Document

Language : English

Page Count : 42

Publication Date : 01/01/2008

Revision : 08

Status : Historical

Title : Enamelled cast iron and enamelled steel plumbing fixtures

Quick Add

$464.00
$297.00
$485.00

Please call 1-800-566-1677 for quotes on subscriptions

See More titles in ASME

See More titles in Designators