ASME A112.18.6

ASME A112.18.6

Flexible water connectors
Flexible water connectors
Flexible Water Connectors
FLEXIBLE WATER CONNECTORS
Flexible Water Connectors

: In stock

Format
$90.00

Standard Details

Scope:
This Standard covers flexible water connectors for use in water supply systems under

(a) continuous pressure in accessible locations; and

(b) intermittent pressure in recreational vehicles only.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex B.

Organization: ASME International
Document Number: asme a112.18.6
Publish Date: 2009-01-01
Page Count: 32
Change Type: REAF
Available Languages: EN
DOD Adopted: NO
ANSI Approved: NO
Most Recent Revision: YES
Current Version: YES
Status: Active

Publication Date: 01/01/2009 - Complete Document Changes Incorporated

Description :

This Standard covers flexible water connectors for use in water supply systems under

(a) continuous pressure in accessible locations; and

(b) intermittent pressure in recreational vehicles only.

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex B.

Document Type : Complete Document

Language : English

Page Count : 32

Publication Date : 01/01/2009

Revision : 09

Status : Current

Supplement : W/

Title : Flexible water connectors

Publication Date: 01/01/2009 - Base Document

Description :

This Standard covers flexible water connectors for use in water supply systems under

(a) continuous pressure in accessible locations; and

(b) intermittent pressure in recreational vehicles only

In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.

All references to gallons are to U.S. gallons.

For information on the conversion criteria used in this Standard, see Annex B.

Document Type : Base Document

Language : English

Page Count : 30

Publication Date : 01/01/2009

Revision : 09

Status : Current

Title : Flexible water connectors

Publication Date: 01/01/2003 - Complete Document Changes Incorporated

Description :

This Standard establishes requirements for flexible water connectors used in potable water systems under continuous pressure and in accessible locations only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identification.

The provisions of this Standard are not intended to prevent the use of any alternate material or method of construction, provided any such alternate meets the intent of this Standard.

Document Type : Complete Document

Language : English

Page Count : 16

Publication Date : 01/01/2003

Revision : 03

Status : Historical

Supplement : W/

Title : Flexible Water Connectors

Publication Date: 01/01/2003 - Base Document

Document Type : Base Document

Page Count : 16

Publication Date : 01/01/2003

Revision : 03

Status : Historical

Title : FLEXIBLE WATER CONNECTORS

Publication Date: 07/09/1999 - Complete Document

Description :

This Standard establishes requirements for flexible water connectors used in potable water systems under continuous pressure and in accessible locations only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identification.

The provisions of this Standard are not intended to prevent the use of any alternate material or method of construction, provided any such alternate meets the intent of this Standard.

Document Type : Complete Document

Language : English

Page Count : 12

Publication Date : 07/09/1999

Revision : 99

Status : Historical

Title : Flexible Water Connectors

Quick Add

$423.00
$289.00
$485.00